Thursday, February 25, 2010

I am painting dark red and on the 3rd coat and it has roller lines help!!!?

I rolled the bottom and then got up on a chair and rolled the top of wall, but you can see where the two sections meet. I didn't wait for it to dry, only long enough to get up on the chair. What do i do to make it less notice \able?I am painting dark red and on the 3rd coat and it has roller lines help!!!?
make sure you're using enough paint, and when it dries it probably wont be noticeable.


To avoid it alltogether, use a long stick attached to your roller and work side to side. You can probably unscrew one from a mop or broom that you already have and use that.I am painting dark red and on the 3rd coat and it has roller lines help!!!?
Let the paint dry. You may even need to sand it, just a little bit, after it dries.
Always roll from the wet section into the dry.





If it's still wet where the roller lines are, try blending it with a brush.
Let it dry. If there is still a defining line then slap another coat on the whole wall only this time use a roller with an extension arm.
Let it dry you wont see it..........
Lilgirls got the correct answer
YOU ARE PRESSING TO HARD ROLL FROM TOP OR BOTTOM


WITH ONE PASS DO NOT STOP

No comments:

Post a Comment